UniCote LUX
UNICOTE
Beyond Colour. Australia’s Premium Steel Choice.
KFC Roofing Supplies offers UniCote LUX, a premium pre-painted steel product designed to suit Australian high-end architectures. Through rigorous testing based on Australian standards, in combination with advanced coil-coating technology, ensuring greatest performance, and matching aesthetics for that high-end luxury roofing look.
Technical Specifications
- Substrate - Hot-Dipped Zinc / Aluminium / Magnesium Alloy coated steel coil. Minimum 150 g/m²
- Pre-treatment - Corrosion resistant conversion coating
- Primer Coat - Flexible corrosion resistant primer
- Nominal Thickness - 7µms ± 1µms; 5µms ± 1µms
- Finish Coat - Polyvinylidene Fluoride (PVDF)
- Nominal Thickness - 35µms ± 8µms
- Backing Coat - Grey Wash Coat
- Nominal Thickness - 5µms ± 1µms
- Protective Film - Available on request
Other Specifications
- Conforms to AS/NZS 2728:2013
- Suitable in atmospheric environment up to ISO 9223 - Category IV: Severe Marine
Why UniCote LUX
Superior performance with stunning patterned and textured finishes.
UNICOTE COLOURS
UNICOTE LUX STEEL
UNICOTE LUX STEELS COLOUR REFERENCES
TESTING SPECIFICATIONS
List of Services
-
FIRE RESISTANCEList Item 1
Meets requirement of AS/NZS 1530.3 Methods for Fire Tests on Building Materials.
-
SCRATCH RESISTANCEList Item 2
No marking of paint surface when tested in accordance with AS 2331.4.7, with no less than 1.5kg weight applied to the test piece.
-
IMPACT RESISTANCEList Item 3
No loss of paint adhesion after a test piece is struck on the reverse side with a specified force of 10j, in line with the test methodology AS/NZS 2728:2013 Section 2.6.1 and Appendix F.
-
BEND TESTList Item 4
No loss of adhesion or paint cracking when bent around a diameter equal to five times the thickness of sheet, AS/NZS 2728:2013 Section 2.6.1, and Appendix F.
List of Services
-
SALT SPRAYList Item 1
Meets the requirements of AS/NZS 2728:2013 Section 2.8 and 2.9.
-
HUMIDITY RESISTANCEList Item 2
Meets the requirements of AS/NZS 2728:2013 Section 2.8 and 2.9.
-
QUV RESISTANCEList Item 3
DURABILITY OF COATING SYSTEM
Meets the requirements of AS/NZS 2728:2013 Section 2.8 and Table 2.4
Note: Tests are conducted on flat panel.