KLING Clips
KLING Standing Seam Fixing Clips PLUS
Fixed clips belong to the indirect fastening means, which allow a secure hold of the metal panels. The number of fixed points is determined by the inclination of the roof and the possibilities of expansion.
Fixed clips PLUS 40mm wide with a special stamping for countersunk screws (stainless steal 1.4301) and a longer clip foot, splays at the foot, rounded edges and three hole fixing.
30mm height is suitable to use with Enkavent/Air-Z with longer clip foot and three hole fixing for angel and machine lock seams with rounded edges.
- Material: Stainless Steel V2A 1.4301
- Sheet thickness: 0.4mm
- Packaging size: 500 pcs
- Width: 40mm
The fixed clips prevent the sheet metal roof from slipping off. The number of fixed clips used must be adapted to the weight of the roof, the inclination of the roof and additional superstructures such as snow retention systems and solar systems. For high snow and wind loads such as in the alpine area or near the coast, it is recommended to use clips with a width of 40 mm.
KLING Standing Seam Sliding Clips PLUS
Sliding clips belong to the indirect fastening means, which allow the expansion and contraction of the metal panels without damage. By regulating the height over the clip base, a higher stability of the clips is achieved.
Sliding clips PLUS feature a sliding range of 55 mm and a special stamping for countersunk screws as well as a stable clip foot.
30mm is suitable to use with Enkavent/Air-Z with longer clip foot and three hole fixing for angel and machine lock seams with rounded edges.
- Material: Stainless Steel V2A 1.4301
- Sheet thickness: 0.4mm
- Packaging size: 500 pcs.
The sliding clips can be used depending on the material for the following maximum panel lengths:
▪ Copper: Total length up to 10 m
▪ Stainless Steel: Total length up to 14 m
▪ Aluminium: Total length up to 10 m
▪ Titanzink: Total length up to 10 m
▪ Galvanized steel sheet: Total length up to 14 m
KLING Flat Lock Clips
Concealed clip for flat lock cladding 50mm height
- Material: Stainless Steel V2A 1.4301
- Sheet thickness: 0.4mm
- Packaging size: 500 pcs
KLING Standing Seam Forked Clips 75mm high
Suitable for Standing Seam Roofs and Corry/Trapezoidal Substrates
- Material: Stainless Steel V2A 1.4301
- Sheet thickness: 0.4mm
- Packaging size: 500 pcs
- Width: 30mm
KLING Astro Snap Seam Fixing Clips
Astro Snap Lock fixing clip for 25mm & 38mm seam height
Features include:
- 25mm or 38mm seam height
- Material: Stainless Steel V2A 1.4301
- Sheet thickness: 0.4mm
- Packaging size: 400 pcs